THE STUDY OF THE PROPERTIES OF POLYMER COMPOSITIONS AND PARTS CREATED ON ITS BASIS FOR THE AUTOMOTIVE INDUSTRY

Authors

  • Usmanov Ikromjon Managing Director Of Jv Llc "Uzauto Cepla", Republic Of Uzbekistan, Tashkent, Uzbekistan
  • Aikhodzhaev Bobir Associate Professor Of The Department "Technology Of High Molecular Weight Compounds And Plastics Tashkent Chemical-Technological Institute, Republic Of Uzbekistan, Tashkent ", Uzbekistan
  • Rajabov Rakhimboy Jaloliddin O’gli Head Of R&D Department, Jv Llc "Uzauto Cepla", Republic Of Uzbekistan, Tashkent, Uzbekistan
  • Kurbanbekov Farrukh Head Of Manufacturing Department, Jv Llc "Uzauto Cepla", Republic Of Uzbekistan, Tashkent, Uzbekistan

DOI:

https://doi.org/10.55640/eijmrms-03-06-08

Keywords:

Minimal moisture, ISO, tensile modulus,

Abstract

The article illustrates the results of laboratory studies of various composite materials for plastic parts of cars, the company "General Motors". As a result, compositions corresponding to the requirements of the GMW standard were obtained. The modes of manufacturing these parts are also recommended.

References

Usmanov I.T., Alimuxamedov M.G., Ayxodjaev B.B., Isaboev S.S. Juraev A.B. [The study of polypropylene of local production]. "Proceedings of the International Conference "Modern Innovations: chemistry and technology of acetylene compounds. Petrochemistry. Catalysis". Tashkent, 2018. p. 158-159.

Usmanov I.T., Ayxadjaev B.B., Tadjixodjaeva U.B. [Investigation of thermophysical properties of polypropylene-based compounds]. "Materials of the International Conference "Actual problems of modern science and innovation in the Central Asian region". Tashkent, 2020, p. 653-654

Usmanov I.T., Alimuxamedov M.G., Ayxodjaev B.B. [The use of waste for the creation of polypropylene compositions for the automotive industry]. "Tasks of environmental protection in chemistry and chemical technologies". 3-section. Tashkent, 2020, p.146-148

Usmanov I.T., Kurbanbekov F.S., Ayxadjaev B.B., Adilov R.I., [The effect of talc on the properties of a compound based on ethylene-propylene copolymer]. "Chemistry and chemical technology". Tashkent, 2021. №3. p. 28-33.

Usmanov I.T., Kurbanbekov F.S., Tajixodjaeva U.B., Adilov R.I., [Comparison of the main physical and mechanical parameters of ethylene propylene copolymers of various industries]. Universum. Technical sciences. Moscow. 2021. №12. p. 63-66

С.А. Harper. Handbook of plastics, elastomers and composites. Mc Grow Hill Handbooks. 210(2004)

S. Kagaku, S.Moritomi, T. Watanabe, S.Kanzaki. “Polypropylene Compounds for Automotive Applications Sumitomo Chemical Co., Ltd. Petrochemicals Research Laboratory – 2010. pp 1-16.

Al-Ali AlMa`adeed M., Krupa I., eds. Poliolefinovyye soyedineniya i materialy [Polyolefin Compounds and Materials] Springer International Ublishing Switzerland 2016. 354 p.

Downloads

Published

2023-06-08

How to Cite

Usmanov Ikromjon, Aikhodzhaev Bobir, Rajabov Rakhimboy Jaloliddin O’gli, & Kurbanbekov Farrukh. (2023). THE STUDY OF THE PROPERTIES OF POLYMER COMPOSITIONS AND PARTS CREATED ON ITS BASIS FOR THE AUTOMOTIVE INDUSTRY. European International Journal of Multidisciplinary Research and Management Studies, 3(06), 33–39. https://doi.org/10.55640/eijmrms-03-06-08

Issue

Vol. 3 No. 06 (2023): Volume - III Issue - VI

Section

Articles

License

Copyright (c) 2023 Usmanov Ikromjon , Aikhodzhaev Bobir , Rajabov Rakhimboy Jaloliddin O’gli, Kurbanbekov Farrukh

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Individual articles are published Open Access under the Creative Commons Licence: CC-BY 4.0.